Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's subtle, doesn't have LED indications or key fobs and is concealed in the wiring of the vehicle.
It also allows users to temporarily disable the system through Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is directly connected to the ECU of your vehicle and secured by a PIN code you set. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and is not able to be disabled by cutting circuits.
The system is simple to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's protection package.
First, the installer must disconnect your battery in order to avoid accidental airbag deployment or short circuits. After this is completed the installer is now able to begin work. Hand tools are the most basic to be used to make precise connections. A multimeter is useful to check electrical values. Insulation tape and cable ties are also essential for protecting connections and keeping wiring neat. The Ghost Immobiliser user's manual will provide specific guidelines specifically tailored to your specific model.
It is crucial to select the right grounding spot that is free of dirt or paint during installation. Installers must also ensure that the immobiliser's wires CAN H and the CAN L are connected to the proper ECU ports. These wires can be plugged in or soldered depending on the model. A top-quality connector is recommended to ensure a long-lasting and reliable connection.
Once the install is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. The customer must press the service icon on the dashboard five times in two seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great choice for those who rent out their vehicles frequently on platforms such as Turo. An immobiliser can reduce insurance rates, as it lowers the chance of theft.
Getting Started
It's not difficult to come up using an autowatch immobiliser for those who want to safeguard your car from theft. It prevents your car from running even if someone steals or copies your key. This is due to its sophisticated technology, which is designed to prevent the car's engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus network CAN, allowing direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure way to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the directions to avoid electrical issues and malfunctions of the system. First, you need to locate and identify a constant 12V power source and an adequate grounding point on the chassis of your vehicle. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for a secure connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits in electrical power.
After the wires have been connected, you can connect the battery and start the engine to test the immobiliser's function. Once you have verified that everything is functioning properly then you can put the immobiliser in a secure location in the vehicle. Be sure to cover it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it meets the highest standards of security and is an excellent protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and it cannot be disabled without knowing the code. The device is easy to use and can be set up to the service valet setting to ensure that your vehicle won't be activated if you bring it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. In contrast to other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of your vehicle's factory settings.
The system is also inaccessible by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals and instead uses CAN data for communication with your ECU. It also doesn't require modifications to your existing key fobs.
To make use of the Ghost Immobiliser simply turn on your car's ignition and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. You are now able to begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while preserving its value. If you ever need to hand over your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) in addition to a grounding source to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and can be touched. It's also recommended to use cable ties to tie and secure the wires, as this will reduce the risk of tampering by potential thieves. Be sure to verify the location of these points to avoid making mistakes and mark them with a piece of tape or label. It's recommended to examine all connections for signs wear and tear. Loose connections can lead to system malfunctions, so be certain that they are securely fixed and well-insulated. Make sure to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit is operating properly, and that all connections are safe and well-insulated. Make sure to address any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU in order to prevent the motor from starting without authorization. The innovative technology protects your vehicle from key cloning and hacking along with other methods commonly employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best protection for your vehicle. This system's unmatched features and discreet design make it a popular choice for car enthusiasts and security-conscious motorists alike.
It is important to follow the steps of installation to ensure the correct integration of the Ghost Immobiliser. Check the wiring diagram for the vehicle as it will aid you in locating and connecting the wires. After that, you'll need determine the power source and grounding points. Once you've found them you'll have to mark them in a way that they are easy to locate when installing. It's important to use high-quality materials and tools. Basic hand tools can assist with making precise connections, while a multimeter will check electrical values and ensure security. Cable tie and insulation tape will keep all connections neat. A Ghost-specific user's guide is also available.
It is important to test the system prior to installing it. Enter the PIN code into the system and then start the vehicle. This test will verify that the immobiliser is working according to plan, and prevents unauthorised vehicle start-ups. It is recommended that you perform this procedure regularly as part of your routine inspections of the vehicle to ensure the system is always functioning correctly.
Once the installation is complete Once the installation is complete, you can drive your car with confidence. ghost 2 immobiliser problems will guard your pride and joy from thieves who might steal your car. It will ensure that no one can drive away with your vehicle even if they don't have the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempt to steal or tamper, allowing you to locate your vehicle in the event of it being stolen.
The Ghost is compatible with a wide variety of automobiles, including those from the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest standards and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that all installations are completed safely and in a correct manner.